Coco Peat — Horticultural Grade, pH Buffered, EC Flushed Growing Medium
රු399.00 – රු499.00Price range: රු399.00 through රු499.00
Coco peat is a natural, renewable growing medium derived from the fibrous outer husk of coconuts — processed, washed, and pH buffered for reliable horticultural use. It holds moisture efficiently while maintaining adequate aeration, making it a foundational component in soil blends, seed germination mixes, and container substrates.
pH buffered to 5.8–6.5. EC flushed to below 1.0 mS/cm. Lightweight, compressible, and dust-free processed. Suitable for tropical houseplants, seedlings, and mixed substrates at 30–50% by volume.
Add රු6,990.00 to cart and get free shipping!
A moisture-retaining base that still lets roots breathe
Most growing media make you choose — hold water, or drain well. Coco peat does both. Its fibrous, sponge-like structure holds moisture in the pore spaces between fibres while the fibres themselves keep air channels open around roots. This balance is why coco peat works as a base medium across such a wide range of plants, from moisture-hungry tropicals to seedlings that can’t tolerate waterlogging.
Agril Coco Peat is processed, washed, and pH buffered before packing. EC is flushed to below 1.0 mS/cm so it won’t stress roots with excess salts on first use.
What’s in the pack
- Coco peat — pH buffered, EC flushed, horticultural grade. Volume: 2.5L/5L.
- Particle form — fine fibrous texture, no large chunks or debris.
- Condition — packed dry and compressed for compact shipping; expands on hydration.
What you can use it for
- Tropical houseplant mixes — blend at 30–50% with perlite and worm castings as a moisture-retaining base.
- Seed germination — use at 60–80% for a fine, consistent germination medium with low nutrient competition.
- Aroid substrate component — pairs well with orchid bark, perlite, and coco chips for open-structure aroid mixes.
- Propagation medium — use damp coco peat to root stem cuttings and leaf nodes before transplanting.
- Soil amendment — blend into dense garden soil at 20–30% to improve water retention and lighten structure.
Hydrating and preparing coco peat
- Place in a large basin or bucket. Coco peat expands significantly on contact with water — use a container at least 3× the dry volume of the product.
- Add clean water slowly — pour water over the block or compressed peat and allow it to absorb before adding more. Use room-temperature water; cold water slows hydration.
- Break apart clumps as the material expands. Use your hands or a trowel to separate fibres evenly. Full hydration typically takes 5–10 minutes of active breaking and mixing.
- Check moisture level — squeeze a handful firmly. It should hold its shape without dripping water freely. If water runs out freely, allow it to drain before using.
- Use immediately or store in a sealed bag or container. Hydrated coco peat can be stored for up to 2 weeks if kept sealed and away from direct sunlight.
Mixing into a houseplant substrate
- Prepare your components — for a standard tropical houseplant mix, measure out: coco peat 40%, perlite 30%, worm castings 20%, and orchid bark or coco chips 10%.
- Combine in a large tray or basin and mix thoroughly until the components are evenly distributed with no visible clumping of any single material.
- Check overall moisture — the mixed substrate should feel lightly damp, not wet. Add dry perlite to reduce moisture if needed.
- Pot your plant and water lightly to settle the substrate. Avoid compacting the mix into the pot — fill loosely and tap the sides to settle.
Tips for best results
- Wear a dust mask when opening the pack and handling dry, unhydrated coco peat — fine fibres are a respiratory irritant.
- Rinse once before using if you want to further reduce EC — pour clean water through the hydrated peat in a colander and allow to drain.
- Don't use it alone for succulents — coco peat retains too much moisture for drought-tolerant species. Always blend with 50%+ perlite or grit for cacti and succulents.
- Top up with fertiliser after 4–6 weeks — coco peat has very low inherent nutrients. Begin a diluted liquid fertiliser programme once the plant is established.
Is this coco peat ready to use straight from the pack, or does it need rinsing first?
It's pH buffered and EC flushed to below 1.0 mS/cm, so it's safe to use directly after hydrating. An additional rinse is optional — it won't cause any harm and will reduce EC slightly further, which some growers prefer for sensitive seedlings or propagation. For general houseplant repotting, the additional rinse is not necessary.
Can I use coco peat as the only growing medium — without mixing?
For most plants, no. Coco peat alone retains too much moisture and has insufficient drainage for container growing. It works well as a standalone medium only for propagation cuttings in small pots with very controlled watering. For established plants, always blend with perlite or bark at a minimum 30% drainage amendment ratio.
How is coco peat different from coco chips? Can I use them interchangeably?
They're from the same source — coconut husk — but processed differently and perform very differently. Coco peat is fine-fibred with high moisture retention and low macroporosity. Coco chips are coarse chunks (10–20mm) with high macroporosity and faster drainage. They're not interchangeable, but they complement each other well in the same mix — coco peat holds moisture, coco chips create airspace.
How long does coco peat last before it breaks down in the pot?
Coco peat is more resistant to decomposition than peat moss, but it does break down over time — typically 18–24 months in a container before its structure begins to compact. When the substrate starts draining more slowly than normal or feels dense and compacted, it's time to repot with fresh mix. The breakdown timeline depends on watering frequency, temperature, and microbial activity in the pot.
The coco peat I hydrated looks stringy and fibrous — is that normal?
Yes, completely normal. Horticultural grade coco peat contains varying fibre lengths — the fine particles give it moisture retention, and the longer fibres maintain some structure and aeration. A mix of fine and fibrous texture is correct. If you prefer a more uniform, fine texture, pass the hydrated peat through a coarse sieve to remove the longer fibres before mixing.
Will coco peat work for orchids?
Not as a primary medium. Orchids (especially epiphytic types like Phalaenopsis and Dendrobium) require far more macroporosity and faster drying cycles than coco peat provides. Use orchid bark or coco chips as the primary component for orchids. Coco peat can be added at 10–15% in an orchid mix to improve moisture retention slightly — but not more than that.
How should I store unused hydrated coco peat?
Seal it in a zip-lock bag or airtight container and store in a cool, shaded location. Hydrated coco peat kept sealed will stay usable for up to 2 weeks. If you see mould developing, the batch has been kept too wet for too long — discard it and hydrate a fresh portion. Dry, unopened coco peat stores indefinitely if kept away from moisture and direct sunlight.
Is coco peat safe for vegetable seedlings and edible plants?
Yes. Coco peat is a natural, non-toxic growing medium with no synthetic additives in its standard form. It's widely used in commercial vegetable propagation. Ensure you're using the standard Agril Coco Peat (not the BioBoost variant) for edibles, as the BioBoost version contains rooting hormone and biological amendments intended for ornamental plants.
Full product specifications
Physical Properties
| Material | Coconut husk fibre (coir) |
| Form | Fine fibrous medium — dry compressed |
| Colour | Dark brown (dry) / medium brown (hydrated) |
| Particle size | Fine fibres; mixed short and long fibre |
| Density (dry) | Approx. 0.08–0.12 g/cm³ |
| Water retention | Up to 8–9× dry weight |
Chemical Properties
| pH range | 5.8–6.5 (buffered) |
| EC (electrical conductivity) | Below 1.0 mS/cm (flushed) |
| Salinity | Low — washed and flushed |
| Nutrient content | Minimal — not a fertiliser |
| Lignin content | Moderate — contributes to slow decomposition |
Application
| Recommended use ratio | 30–50% by volume in mixed substrates |
| Suitable plant types | Tropical houseplants, aroids, seedlings, ferns |
| Not recommended for | Succulents and cacti as primary medium |
| Substrate life | 18–24 months before breakdown in container |
| Reusability | Single use — compost after spent |
Packaging
| Volume | 2.5L, 5L |
| Gross weight | 500g/1kg |
| Pack type | Sealed resealable bag |
| Condition at dispatch | Dry and compressed |
| Shelf life (sealed, dry) | Indefinite — store away from moisture |
| Warranty | No warranty — consumable growing medium |
Only logged in customers who have purchased this product may leave a review.
Frequently bought together
Coco Peat — Horticultural Grade, pH Buffered, EC Flushed Growing Medium
Sphagnum Moss — Long-Fibre Horticultural Grade, Air-Dried, High Water Retention
Sphagnum moss is a long-fibre, naturally acidic growing medium harvested and air-dried for horticultural use. Its hollow capillary fibre structure holds water at up to 20× its dry weight while maintaining sufficient airflow around roots — a balance very few substrates achieve. Slightly acidic pH (4.0–5.0) makes it well-suited for moisture-loving, acid-preferring plants.
Long-fibre horticultural grade. pH 4.0–5.0. Air-dried. Ideal for Monsteras, Anthuriums, Hoyas, terrariums, moss poles, and orchid mounting. Soak for 5–10 minutes before use.
Horticultural Charcoal — Sustainably Sourced Selected Hardwood, Toxin Adsorption, Terrarium Grade
Agril Horticultural Charcoal is produced by slow-burning selected hardwoods chosen specifically for their low resin content and clean burn profile — resulting in a pure, mineral-rich carbon amendment free from resinous contaminants. The porous carbon structure adsorbs excess salts, organic waste compounds, and volatile impurities that accumulate in closed or low-drainage container environments, helping maintain substrate freshness over time.
pH approximately 7.0–8.5. Sustainably sourced hardwood. Use at 5–10% in terrariums, closed systems, and any substrate where long-term hygiene and toxin control are priorities. Not a substitute for activated carbon in aquatic systems.
Burned Rice Husk — Carbonised Rice Hull Biochar, Permanent Drainage Amendment, Sterile
Burned rice husk is fully carbonised rice hull — a black, lightweight biochar material produced by controlled high-temperature combustion of paddy husks. Its porous carbon matrix improves drainage, increases aeration, and provides long-lasting physical structure in any substrate blend. Unlike organic amendments, carbonised rice hull does not decompose and contributes stable, permanent porosity to the mix.
pH approximately 7.0–8.5 (slightly alkaline). Sterile. Weed-free. Long-lasting structural amendment. Use at 10–20% by volume in mixed substrates. Pair with worm castings or fertiliser for nutrition — carbonised husk is not a nutrient source.
Clay Pellets (LECA) — Lightweight Expanded Clay Aggregate, Reusable, pH Neutral
Clay pellets — also known as LECA (Lightweight Expanded Clay Aggregate) — are kiln-fired clay spheres with a porous internal structure and a hard, stable outer shell. pH neutral, chemically inert, and reusable indefinitely with proper cleaning, they create excellent drainage channels, prevent substrate compaction, and work as a standalone semi-hydroponic medium or a structural drainage layer beneath finer media.
Particle size 8–16mm. pH neutral. Sterile. Suitable for semi-hydroponic growing, passive hydroponics, drainage layers, and open-structure aroid substrate blends.
Worm Castings — Pure Vermicompost, Slow-Release Organic Nutrition, Odour-Neutral
Worm castings are the finished vermicompost output of earthworms processing organic matter — a dense, nutrient-rich amendment that feeds soil biology, improves structure, and provides gentle slow-release nutrition without burn risk at recommended ratios. Unlike synthetic fertilisers, castings simultaneously improve microbial activity, water retention, and nutrient availability.
NPK approximately 1–0.7–1.1 with a rich micronutrient and humic acid profile. Odour-neutral. Safe for all plants including seedlings. Use at 10–20% by volume in any substrate blend or as a top-dress amendment.
You may also like…
Agril BioBoost Coco Peat — Trichoderma-Enriched, Rooting Hormone & Starter Fertiliser Blended Growing Medium
BioBoost Coco Peat is premium pH-buffered coco peat pre-enriched with a Trichoderma-based biological fungicide, plant-derived rooting hormone, and a balanced starter fertiliser — delivering a substrate that actively supports root development, suppresses soil-borne pathogens, and provides early nutrition from day one. It is the ready-to-use choice for propagation, repotting aroids, and establishing newly potted tropicals.
pH buffered to 5.8–6.5. EC flushed to below 1.0 mS/cm prior to enrichment. Sterile base medium. No additional fungicide treatment required for the first 6–8 weeks of use.
Related products
Agril BioBoost Coco Chips — Trichoderma-Enriched 10–20mm Coconut Husk for Orchids and Aroids
BioBoost Coco Chips combine the macroporous drainage structure of 10–20mm coconut husk chunks with supplier-blended enrichments: a Trichoderma-based biological fungicide, plant-derived rooting hormone, and a balanced starter fertiliser — giving roots both the physical space to expand and the biological environment to establish faster.
Chip size 10–20mm. pH 5.5–6.8. Low EC. Sterile base. No additional fungicide treatment required for the first 6–8 weeks. Purpose-built for orchids, aroids, and epiphyte mixes where establishment speed and root health matter.
Agril Coco Chips – Horticultural Grade 10–20mm Chunky Coconut Husk for Orchids and Aroids
Coco chips are coarse, chunky pieces of coconut husk that create large air pockets and fast-draining structure in any substrate blend. Unlike fine coco peat, chips provide macroporosity — the open channels roots need to breathe in container growing — while retaining enough moisture for healthy hydration between waterings.
Chip size 10–20mm. pH range 5.5–6.8. Low EC. Suitable for orchids, aroids, and any plant that demands an open-structure, chunky mix. Use at 30–50% by volume.

Shop All HousePlants
Reviews
Clear filtersThere are no reviews yet.